99 All prices are subject to change. Please refer to our website for most recent pricing. Composite Materials Construction & Repair Construction & Repair REINFORCING YOUR IDEAS REINFORCING YOUR IDEAS Innovative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and aramid, also known as NCFs (non-crimp fabrics), with more than 2,500 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX products are individually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orientation are ideally adjusted The positions are specifically aligned to the ideal quantity and orientation in the loading direction // Angles of between -22.5° and +22.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while maintaining equal mechanical properties or even a higher component load with the same component weight. 3 Individual drapability and outstanding permeability The drapability of the SAERTEX fabric is tailored to customer requirements and exhibits outstanding permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing costs (fewer layers are required thanks to the higher area weight of the individual layers). 5 Resin compatibility SAERTEX-fabrics are optionally compatible with various resin systems: EP / UP / VE / PUR / PP / PA and caprolactam. MULTIAXIAL FABRICS MADE OF GLASS, CARBON AND ARAMID REINFORCING YOUR IDEAS I novative and tailor-made: SAERTEX fabrics made of glass fibre, carbon and ramid, also known as NCFs (non-crimp fabrics), with more than 2,5 0 article designs. Depending on the fibre type, surface weight and angle combination, various mechanical ch racteristics can be achieved. SAERTEX products are ind vidually configured for our customers and optimally adapted to a range of processes: infusion, RTM, pultrusion, prepreg, compression, etc. DATE 02/17 1 Fibre, weight and orien ation are ideally adjusted The positions are specifically aligned to the ideal quantity and orien ation in the loading direction // Angles of betw en - 2.5° and + 2.5° are possible // 0° position is also possible. 2 Stretched fibres for optimum mechanical strength Absorption of the highest possible loads through stretched fibres // Reduced component weight while mainta ing equal mechanical properties or even a higher component load with the same component weight. 3 Ind vidual drapability and ou standing permeability The drapability of the SAERTEX fabric is tailored to custome requirements and exh bits ou standing permeability // Optimisation and enhancement of the SAERTEX fabrics for infusion processes. 4 Cost savings due to fewer layers Reduction of the manufacturing co ts (fewer layers are required thanks to the higher area weight of the ind vidual layers). 5 Resin compat bility SAERTEX-fabrics are optionally compatible with various resin ystems: EP / UP / VE / PUR / P / PA and caprolactam. I I I , I REINFORCING YOUR IDEAS REINFORCING YOUR IDEAS REINFORCING YOUR IDEAS
RkJQdWJsaXNoZXIy MzI5NTg=