2021 Bluewater Supply Catalog

All prices are subject to change. Please refer to our website for most recent pricing. 21 Construction & Repair Construction & Repair Laminating Consumables Laminating Consumables | Tape | Double Faced Rowley Double faced adhesive tape is Ideal for holding fabric to vertical slats, wood, metal, or etc. The high strength adhesive is not affected by sunlight or temperature. • One (1) Ordering Unit is: 1 Roll • Minimum Order Quantity: 1 Roll = 60 Yards BWS Part Number Description Price RWLY DF100 Double Faced Adhesive Tape - 1” x 60 Yards $63.00 RWLY DF75 Double Faced Adhesive Tape - 3/4” x 60 Yards $47.78 Laminating Consumables | Frekote | Wolo Construction & Repair Loctite Frekote Wolo is a clear, moisture- cured mold release polymer liquid which is wiped on and left on the mold surface and allowed to evaporate. It ensures multiple releases and gives a high gloss gel finish to FRP polyester parts. • One (1) Ordering Unit is: 1 Gallon • Minimum Order Quantity: Each BWS Part Number Description Price BWS FK-WOLO-1GL Frekote Wolo - 1 Gallon $439.73 Laminating Consumables | Frekote | FMS Construction & Repair Loctite Frekote FMS is solvent-based sealer used in the preparation phase for composite molds as a wipe-on product that results in a high gloss surface. It is formulated specifically as a sealer for fiberglass reinforced polyester, epoxy and other composite molds. The product seals micro porosities and provides uniform release agent coating and is moisture-cured in 20 min. • One (1) Ordering Unit is: 1 Gallon • Minimum Order Quantity: Each BWS Part Number Description Price BWS FK-FKFMSG Frekote FMS - 1 Gallon $480.62 Laminating Consumables | Frekote | PMC Construction & Repair Loctite Frekote PMC is a post-cleaner with a special blend of solvents designed to dissolve and remove wax from polyester molds without dulling the surface. It can also be used to clean epoxy and metal mold surfaces, as well as brushes and equipment. • One (1) Ordering Unit is: 1 Gallon • Minimum Order Quantity: Each BWS Part Number Description Price BWS FK-PMC-1GL Frekote PMC - 1 Gallon $66.00 Laminating Consumables | Release Agent Construction & Repair PV-6 is a film forming agent that serves as a sealer and release agent in liquid form. The resulting release film dries immediately and polymerizes quickly. PV-6 can be applied when the relative humidity is high and the ambient temperature is low. It will bond to and develop a release film in spite of the moisture contents of any substrate or surface. Thus, PV-6 can be sprayed over plaster, clay, wood varnish and shellac surfaces that may contain moisture. • One (1) Ordering Unit is: 1 Gallon • Minimum Order Quantity: Each BWS Part Number Description Price FIN PV-6/GL Mold Release Agent, Spray or Brush - 1 Gallon $111.38 Laminating Consumables | Release Agent | Partall Paste Construction & Repair Partall® Paste #2, the original green wax, is an economical paste wax mold release formulated with hydrocarbon and microcrystalline waxes. Designed as a general purpose mold release agent on fiberglass and metal molds where standard silicone wax releases cannot be tolerated. It may also be used as a prime coat for PVA coatings, such as Partall® Film #10 and Partall® Coverall Film. • One (1) Ordering Unit is: 1 Tub • Minimum Order Quantity: 1 Tub = 7 lb. BWS Part Number Description Price BWS REXPW27 Partall® Paste #2 - 7 lb. $90.00 UPS Shipments Order by 3pm for same-day processing