2021 Bluewater Supply Catalog

Morehead City, NC 252.638.3553 bluewatersupply.com 20 Construction & Repair Construction & Repair Laminating Consumables Laminating Consumables | Resin Feed | Elevated PRO-VAC A steel coil resin feed wrapped in Pro-Vac Low-Flow Infusion Mesh (PV-50). This allows the resin feed to be elevated about the part when under vacuum to prevent part imperfections caused by resin feed lines. Can be used up to 250°F. • One (1) Ordering Unit is: 1 Feed • Minimum Order Quantity: 1 Feed BWS Part Number Description Price PVAC PV-68-40 Elevated Resin Feed - 40’ $128.03 Laminating Consumables | Resin Feed | Enka® PRO-VAC Enka 3D matrix infusion channel for fast resin flow. Increases efficiency and reduces infusion time. Provides steady flow speeds over large surfaces. Maximum use temperature of 302°F. • One (1) Ordering Unit is: 1 Feed • MinimumOrder Quantity: 1 Feed = 328’ BWS Part Number Description Price PVAC PV-66-50 Enka® Resin Feed - 2” x 328’ $537.52 PVAC PV-66-100 Enka® Resin Feed - 4” x 328’ $694.72 Laminating Consumables | Resin Feed | Omega PRO-VAC A PVC Omega profile channel with 16 mm inner diameter. Maximum use temperature of 140°F. • One (1) Ordering Unit is: 1 Feed • Minimum Order Quantity: 1 Feed = 6.5’ BWS Part Number Description Price PVAC PV-64 Omega Resin Feed - 5/8” x 6.5’ $6.10 Laminating Consumables | Tape | Sealant Tape | Tacky Construction & Repair Tacky Tape SM5142 is a sealant tape designed for vacuum bagging and autoclave operations. Its aggressive initial tack can maintain an air-tight seal during the cure cycle, yet strip clean from the tool, with virtually no trace of residue. • One (1) Ordering Unit is: 1 Roll • Minimum Order Quantity: 1 Roll = 25’ BWS Part Number Description Price NORT ST-SM5142-400-BYL Tacky Tape, Yellow - 1/2” x 1/8” x 25’ $8.97 Laminating Consumables | Tape | Sealant Tape | GP PRO-VAC PV-80 General Purpose Sealant Tape is designed for vacuum infusion, wet layup, and bag-to-bag (envelope bagging) processes. It performs best at room temperature ,+68°F, and has a maximum use temperature of 302°F. If the tape is too cold the tack levels will be dramatically reduced. Compatible with most vacuum films and tool surfaces. • One (1) Ordering Unit is: 1 Roll • Minimum Order Quantity: 1 Roll = 50’ BWS Part Number Description Price PVAC PV-80-3 General Purpose Sealing Tape - 1/2” x 50’ $16.97 Laminating Consumables | Tape | PSA Tape PRO-VAC Pro-Vac Pressure Sensitive Multipurpose tape is an economical pressure sensitive tape intended for use vin vacuum infusion, wet lay-up bagging, and bag-to-bag (envelope bagging) processes. It is blue for easy identification in the mold. This tape is a silicone adhesive on a polyester backing that performs best at room temperature and has a maximum use temperature of 356°F. If the tape is too cold the tack levels will be dramatically reduced. • One (1) Ordering Unit is: 1 Roll • Minimum Order Quantity: 1 Roll = 72 Yards BWS Part Number Description Price PVAC PV-25-25 Pressure Sensitive Multipurpose Tape - 1” x 72 Yards $30.33 PVAC PV-25-50 Pressure Sensitive Multipurpose Tape - 2” x 72 Yards $59.03 Laminating Consumables | Tape | Flash Tape Construction & Repair Flash Tape 1 is designed for all phases of masking operations where no residue can be tolerated. It is perfect for holding release films, and fabrics, bleeders and breathers, metal and composite details in place during pre-fit and pre-bond operations. It is highly recommended for long term temperature exposures over 350°F. • One (1) Ordering Unit is: 1 Roll • Minimum Order Quantity: 1 Roll = 72 Yards BWS Part Number Description Price NORT TP-FLASH1-100-GRT 1” Flash Tape 1, Blue - 72 Yards $21.13 NORT TP-FLASH1-200-NC 2” Flash Tape 1, Blue - 72 Yards $41.14