2018 Bluewater Supply Catalog

206 Morehead City, NC 252.638.3553 bluewatersupply.com Paint Primer Paint Primer | Barrier Coat Seahawk Chlorinated rubber based primer recommended for use over previous copper based antifoulants prior to recoating to insure excellent adhesion. High build, corrosion resistant, for use on new or old metal and fiberglass substrates. No converter required for 1277. 125 sq. ft./Gallon. Only 1 coat required. Comes in gallons and quarts. • One (1) Ordering Unit is: 1 Can | Min. Order Qty is: 1 BWS Part Number Description Price SHAWK 1277/QT Barrier Coat Primer, 1 Quart $24.44 SHAWK 1277/GL Barrier Coat Primer, 1 Gallon $85.22 Primer | Non Sanding Seahawk Fiberglass treatment is intended for application directly to the fiberglass in place of sanding when applying antifouling paint to the bottom of a vessel. 1266 softens existing gelcoat to create an adequate chemical bond. Although no sanding is required, the grease, wax, and oils must be removed with a product like S-80 ”Wax ‘N’ Grease Killer”. This product doesn’t need converter. Sold in quarts. • One (1) Ordering Unit is: 1 Can | Min. Order Qty is: 1 BWS Part Number Description Price SHAWK 1266/QT Fiberglass Non-Sanding Primer, 1 Quart $40.45 Primer | Shawkocon Seahawk Shawkocon is a fast-drying, general purpose below-the-waterline anti-corrosive primer. Its physical properties and excellent adhesion characteristics provide an easy-to-use multi- functional primer. This product can be used as a barrier/sealant when their is an unknown or incompatible coating to prevent leaching. 330 sq. ft./Gallon. No converter required. • One (1) Ordering Unit is: 1 Can | Min. Order Qty is: 1 BWS Part Number Description Price SHAWK SH984/GL Shawkocon, 1 Gallon $109.76 Primer | Tack Coat Seahawk Anticorrosive Epoxy Primer for use on properly steel, aluminum or galvanized steel. S-76 & S-76C is specifically designed for underwater metal surfaces including hulls, running gear, and the lower units of outboards and I/O’s. It provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. This product is sold as a 2 gallon “kit”. • One (1) Ordering Unit is: 1 Kit = 2 Gallons | Min. Order Qty is: 1 Kit BWS Part Number Description Price SHAWK S-76/GLKIT Strontium Chromate Kit, 1 Gallon $386.99 Primer | Tuff Stuff Seahawk Tuff Stuff is an extremely high-build two- part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff is effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration. Mix ration for A&B is 1:1, 200 sq. ft./Gallon. • One (1) Ordering Unit is: 1 Kit = 1/2 Gallon or 2 Gallon | Min. Order Qty is: 1 BWS Part Number Description Price SHAWK 1284/HGLKIT Tuff Stuff Gray Kit, 1/2 Gallon $78.82 SHAWK 1284/2GLKIT Tuff Stuff Gray Kit, 2 Gallon $237.53 SHAWK 1285/2GLKIT Tuff Stuff White Kit, 2 Gallon $237.53 SHAWK 1286/1GLKIT Tuff Stuff Low Voc Gray, 1 Gallon $123.20 SHAWK 1287W/1GLKIT Tuff Stuff Low Voc White, 1 Gallon $123.20 252.638.3553 We are adding new products every week. Give us a call to learn about what’s new!