2018 Bluewater Supply Catalog

Note: All swatch colors shown in this brochure are approximations of the actual paint color in the can or mixes. HARD ANTIFOULING FRESHWATER ANTIFOULING BLUE - 1221 ORIGINAL - 1921 SR-21 is an ultra-thin, super slick, low friction film for boat bottoms. It is an ideal racing finish for fresh water or cold saltwater boats. Its dual biocides combine the power of copper and enhanced technology, to produce an effective, thin film antifouling. It contains the slicking agents PTFE and Molybdenum Disulfide to reduce surface friction, allowing the hull to slide through the water. SR-21 is easy to apply and dries in 15 minutes. Color changes upon immersion. Trinidad ® and Trinidad ® 75 – the top-of- the-line in conventional antifouling paints. It has earned its reputation as one of the most respected names in the industry. Trinidad ® delivers an extremely high load of cuprous oxide (up to 75%), to combat even the most extreme fouling conditions. Its durable, hard modified epoxy finish has excellent adhesion, and is highly abrasion resistant. When left in the water, Trinidad ® will provide years of dependable service. The perfect choice for competitive racing or blue water cruising. BLUE - 1275 GREEN - 1375 RED - 1675 BLACK - 1875 Trinidad ® LT BLUE - 1071 BLUE - 1072 RED - 1076 BLACK - 1078 SP BLACK-1079 Trinidad ® 75 Prop Coat Barnacle Barrier 1792 provides easy to use aerosol spray protection for bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel, and lead. It forms an excellent bond to underwater metals and running gear, and inhibits corrosion on these surfaces. Prop Coat Barnacle Barrier’s smooth, hard surface will self-clean in service, and can be used above or below the waterline. The dried film of Prop Coat contains the highest percentage of pure Zinc. PROPELLER AND SHAFT BLUE - 1277 GREEN - 1377 RED - 1677 BLACK - 1877 Trinidad ® SR BLUE - 1082 GREEN - 1083 RED - 1086 BLACK - 1088 Trinidad ® PRO Trinidad ® SR and Trinidad ® PRO – the standard by which all bottom paints are measured. It remains the longest lasting, strongest antifouling paint available. Utilizing the dual biocide combination of a high copper load and slime resistant Irgarol, Trinidad ® SR provides unprecedented resistance to all fouling. Its hard protective coating has excellent adhesion, and withstands the toughest abuse. Left in the water, it will provide years of dependable service. So effective it earned Practical Sailor’s “Gear of the Year” honors twice. PONTOON BOAT ANTIFOULING Pontoon Pro 1008 - was designed specifically for pontoon boats and aluminum hulls. It combines the breakthrough, metal-free Eco- nea™ biocide with a powerful slime fighting agent for dual-biocide, multi-season protection. This copper-free formula can be safely ap- plied to all aluminum hulled boats. It provides excellent antifouling protection, with an ablative surface that polishes with use. The paint film wears away over time like a bar of soap, eliminating build-up or the need for sanding between coats. It can be used over all previously painted surfaces in good condition. Available in BLACK only. Transducer Paint 1793 is for use only on plastic transducer housings and bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel and lead. It forms an excellent adhesive bond to underwater plastic housings and metals, and inhibits corrosion on these surfaces. Transducer Paint’s smooth, hard surface will self-clean in service, and can be used above or below the waterline. The dried film of Transducer Paint contains 93% pure zinc. How Much Bottom Paint Do I Need? 1 Calculate the square footage of the hull to be painted – multiply the length of the hull by the beam then multiply that total by .85 Length x Beam x .85 = Square Feet of Hull length beam 2 Divide that number (your square foot total) by the amount of coverage the selected bottom paint offers. This will give you a one-coat total. Unepoxy ® and Unepoxy Plus ® have long been the standard bottom paints for many boatyards and boat owners. It is a dependable antifouling paint formulated to provide outstanding protec- tion at a very affordable price. The durable, hard modified epoxy finish is able to withstand beaching, trailering, and season long abuse. Both provide excellent coverage and adhesion, and they can be applied over most bottom paints in good condition. Suitable for all non-aluminum trailered boats. BLUE - 1228 GREEN - 1328 RED - 1628 BLACK - 1810 BLUE - 1218 GREEN - 1318 RED - 1618 BLACK - 1818 Unepoxy ® Unepoxy Plus ® pettitpaint.com • 800-221-4466